Le 10/02/2019

Heavy duty & sustainable cold heading oils

At Fastener Stuttgart, CONDAT will exhibit Stand 2450, Hall 3 the most extensive range of lubricants dedicated to cold heading processes. Since 1854, the company has been specialized in the development and production of industrial lubricants. Today, its strong lubrication expertise serves the fastener industry.

The high pressures exerted between the tool and the part require the use of high-performance lubricants to avoid premature wear and breakage of tools. CONDAT dedicated solutions include soaps for skin-pass or wire drawing operations before cold heading, multi-purpose forming oils, heavy duty forming lubricants, extreme pressure neat cutting oils for thread rolling and tapping and also quenching oils and polymers.

In addition to a comprehensive range of products, CONDAT offers also true innovative responsible & sustainable solutions.


Sustainable cold heading oil

Concerned for the future, CONDAT is committed to a responsible approach and offers its customers technical solutions allowing them to reduce their impact on the working place and the environment.


The evolution of cold stamping machines and the growing knowledge of subcontractors make it possible today to produce more and more complex and massive pieces. Section reductions greater than 70% become common, generating enormous pressure on tools (punches & dies). EXTRUGLISS GREEN’s vegetable-based cold-heading oils meets these technical requirements while increasing the OEE* and reducing tooling budgets. Thanks to the high level of lubricity of vegetal base oil (3 times more efficient than standard mineral base oils), EXTRUGLISS GREEN enables to manufacture very difficult parts, and even some references manufactured initially in machining can today be produced with cold stamping process. Highly efficient and more respectful of the operator’s working environment, EXTRUGLISS GREEN is a 2-in-1 oil that provides superior lubrication to both the machine mechanisms and the tools side. It also increases the OEE (efficiency of your machine). These oils can be used for heavy duty forming operations (screw, bolt, nuts and extrusion’s parts). Its high flash point ensures lower mist and smokes, giving operators a friendly working environment. It perfectly answers the requirements of presses manufacturers.

Meet CONDAT at Fastener Stuttgart 2019, Hall 3 – Stand 2450 or contact our sales team at info@condat.fr.



*OEE= Overall Equipment Effectiveness